HOME > Product Information > Product Information by Function > Low Moisture Permeability

Low Moisture Permeability

Low Moisture Permeability

Low moisture permeability

Directions for Use of Products

Product Safety Guide

Product name TB1152C TB1152D TB3017B
Main component Olefin-based sealants Two-component olefin-based Acrylate
Appearance Milky white White Black Milky white
Viscosity (Pa·S) 650 390 230 16
Curing conditions 100°C×90 minutes 90°C×30 minutes Cumulative light intensity 30kJ /㎡
Glass transition temperature(℃)
DMA method 1HzE" peak
-77 - 22.5
Moisture permeability (1mm thick)
g/㎡・24h
40℃×95%RH
5.56 0.5 3.1
Special remarks ·After curing, becomes rubber-like property.
·Compared to silicone sealants, it has approximately 20 times the hydrogen gas barrier.
Approximately 1/100 of moisture permeability
·Excellent chemical resistance
·After curing, becomes rubber-like property.
·Excellent gas barrier
·Excellent chemical resistance
·After curing, becomes rubber-like property.
Download SDS/technical information To Information Selection Page To Information Selection Page To Information Selection Page
Product name TB3035B TB3124
Main component Acrylic resin UV curable epoxy resin
Appearance Milky white Cherry white
Viscosity (Pa·S) 51 270
Curing conditions Cumulative light intensity 30kJ /㎡ 60kJ/m2+Heat
Glass transition temperature(℃)
DMA method 1HzE" peak
19 134
Moisture permeability (1mm thick)
g/㎡・24h
40℃×95%RH
6.0 30
(40°C×95%RH)
※Film thickness 150µm
Special remarks ·Sealant for DSSC
·Single component, non-solvent type
·Resistance to liguid electrolyte
·Sealants for organic EL
·Single component, non-solvent type
·Contains 20μm of a gap agent (other grades are available)
Download SDS/technical information To Information Selection Page To Information Selection Page

* Measurements are taken under the standard testing conditions for each grade.

 

These are examples of products.  To inquire about other products, please click here.
Qustions
Product Information