2000,2100,2080,2200 series(Epoxy resins series)
2000,2100,2080,2200 series(Epoxy resins series)
The two-component type causes a chemical reaction to become cured, when the base agent is mixed with a hardener. Depending on the combination, various curing speed and properties can be achieved. The single-component type causes a chemical reaction when heated, then being cured.
Two component epoxy resins (base agent) 2000 series
| Product name | Features and Uses | Viscosity (Pa·S) | Shearing strength (MPa Iron/Iron) |
Download MSDS/ technical information |
|---|---|---|---|---|
| TB2022 | Adhesion, casting , general purpose | 13 | 21 |
 |
| TB2023B | Low viscosity, casting | 0.2 | 12 |
|
* Measurements are taken under the standard testing conditions for each grade.
Two component epoxy resins (hardener) 2100 series
| Product name | Features and Uses | Viscosity (Pa·S) | Shearing strength (MPa Iron/Iron) |
Download MSDS/ technical information |
|---|---|---|---|---|
| TB2103 | Fast curing for general purpose | 20mPa･s | 17 |
|
| TB2105F | Flexibility | 40 | 20 |
|
| TB2106G | Long pot life type for general purpose | 3 | 18 |
|
| TB2107 | High strength | 27 | 26 |
|
| TB2131D | Heat curing | 10mPa･s | 16 |
|
* Measurements are taken under the standard testing conditions for each grade.
Two component epoxy resins (a set of a base agent and a hardener) 2080 series
| Product name | Features and Uses | Viscosity (Pa·S) |
Shearing strength (MPa Iron/Iron) |
Download MSDS/ technical information |
|---|---|---|---|---|
| TB2081D |
Room temperature curable, soft polyvinyl chloride adhesion |
Base agent:11/ Hardener: 10 |
2.4 Soft PV/Soft PV |
|
| TB2083 |
Wet-surface/low-temperature curing, Water curing |
Paste form | 7 |
|
| TB2086M |
Fast room temperature curing, For repair |
Base agent:13/ Hardener: 10 |
20 |
|
| TB2086N | Low temperature curable |
Base agent:110/ Hardener: 50 |
14 |
|
| TB2088E | High heat resistance |
Base agent: 40/ Hardener: 4 |
18 |
|
* Measurements are taken under the standard testing conditions for each grade.
Single component epoxy resins 2200 series
| Product name | Features and Uses | Viscosity (Pa·S) | Shearing strength (MPa Iron/Iron) |
Download MSDS/ technical information |
|---|---|---|---|---|
| TB2202 | Low temperature curable | 13 | 10 |
|
| TB2212 | Low temperature curable | 13 | 15 |
|
| TB2212Q | Low halogen | 15 | 10 |
|
| TB2222P | Solder heat-resistant, highly-peelable | 45 | 24 |
|
| TB2249G | High strength / High peelability | 75 | 39 |
|
| TB2270C | Heat dissipation | 65 | 22 |
|
| TB2274S | Low elasticity,High Tg | 3.8 | 23 |
|
| TB2280E | Low viscosity, low heat emission during curing | 1 | 11 |
|
| TB2285 | High heat resistance | 98 | 21 |
|
* Measurements are taken under the standard testing conditions for each grade.
Other series of Adhesives
1200 series
(Silicone-based liquid adhesives and seals, potting agents)
1300 series
(Anaerobic high-strength sealants)
1400 series
(Agents to prevent screws from loosening, leaking and rusting)
1500 series
(Industrial adhesives / Single component, moisture-curable elastic adhesives)
1600 series
(Functional sheet adhesives)
1700 series
(Instant adhesives)
7700 series
(Gold Label instant adhesives)
2400 series
(Pre-coating of nuts and bolts to prevent screws from loosening and leaking)
2900 series
(Electronic parts protecting-agents/heat dissipating resins)
3000,3100 series
(UV curable resins)
3300 series
(Electroconductive resins)
3370 series
(Anisotropic conductive paste)
3500 series
(Temporary adhesives)
3700 series
(Heat-resistant, inorganic adhesives)
3900 series
(Structural adhesives / High peeling strength, impact-resistant, two component elastic adhesives)
