3000,3100 series(UV curable resins)
3000,3100 series(UV curable resins)
This product is a non-solvent resin that cures quickly when it is irradiated with UV light.
UV curable resins 3000 series
| Product name | Features and Uses | Viscosity (Pa·S) | Shearing strength (MPa) | Hardness (JIS) | Thick film curability (mm) | Download MSDS/technical information |
|---|---|---|---|---|---|---|
| TB3013Q | Sealant for electrical components |
23 |
4.1 (Iron/Glass) | A32 | 3.5 |
 |
| TB3017D | Soft, low halogen, hard-to-bond, LED curable | 13 | 4.3 (ZnDc/Glass) | A41 | 2.5 |
|
| TB3026E | For LCD end sealing | 19 | Material breakdown (Glass/Glass) | D85 | 6.4 |
|
| TB3030 | Soft, heat cycle resistance | 16.5 | Material breakdown (SUS/Glass) | D63 | 12 |
|
| TB3035B | Low moisture permeability,solvent resistant | 5/ | 7(Glass/Glass) | D48 | 4.2 |
|
| TB3042B | Hard, good surface curability | 0.5 | Material breakdown (Glass/Glass) | D80 | 1.5 |
|
| TB3056F | With moisture curing capability | 6 | 6.4(Glass/Glass) | D65 | 4.2 |
|
| TB3057 | With heat curing capability | 35 | 20(Iron/Iron) | D90 | 4 |
|
| TB3059D | Low outgassing, thixotropic property | 80 | 8 (Glass/Glass) | D86 | - |
|
| TB3062 | With anaerobic curing capability | 8 | Material breakdown (Glass/Iron) | D70 | 3.5 |
|
| TB3065E | With anaerobic curing capability, low outgassing | 7 | 11.7(Iron/Glass) | D60 | 2.5 |
|
| TB3081J | For CIPG | 95 | - | A27 | 3.6 |
|
* Measurements are taken under the standard testing conditions for each grade.
UV curable resins 3100 series
| Product name | Features and Uses | Viscosity (Pa·S) | Shearing strength (MPa) | Set time (Seconds NBR) | Download MSDS/technical information |
|---|---|---|---|---|---|
| TB3114 | Epoxy-based, for low linear expansion / precision fixing |
26 |
Material breakdown (Glass/Glass) | - |
|
| TB3164D | Silicone-based, with moisture curing capability / adhesion to engineering plastic | 10 | 4(Glass/Glass) | - |
|
| TB3168 | Silicone gel | 15 | - | - |
|
| TB3170D | 光学部品用,Visible light curing property | 37 | 8 (Acrylic/SUS) | - |
|
| TB3177 | With moisture curing capability, low energy curing | 1.2 | 20(Iron/Iron) | 20 |
|
* Measurements are taken under the standard testing conditions for each grade.
Other series of Adhesives
1200 series
(Silicone-based liquid adhesives and seals, potting agents)
1300 series
(Anaerobic high-strength sealants)
1400 series
(Agents to prevent screws from loosening, leaking and rusting)
1500 series
(Industrial adhesives / Single component, moisture-curable elastic adhesives)
1600 series
(Functional sheet adhesives)
1700 series
(Instant adhesives)
7700 series
(Gold Label instant adhesives)
2000,2100,2080,2200 series
(Epoxy resins series)
2400 series
(Pre-coating of nuts and bolts to prevent screws from loosening and leaking)
2900 series
(Electronic parts protecting-agents/heat dissipating resins)
3300 series
(Electroconductive resins)
3370 series
(Anisotropic conductive paste)
3500 series
(Temporary adhesives)
3700 series
(Heat-resistant, inorganic adhesives)
3900 series
(Structural adhesives / High peeling strength, impact-resistant, two component elastic adhesives)
