|
Product category
1000 series
2000 series
3000 series
4000 series
5000 series
6000 series
7000 series
9000 series
Others
|
 |
 |
ThreeBond 1771E, 1773E Instant-adhesives with light-curing property |
ThreeBond 1771E/1773E are α-cyanoacrylate-based instant adhesives that have additional function to cure when exposed to light. By use of the proprietary photo-anion-polymerization technology developed by ThreeBond, the product can also be cured by irradiation with ultraviolet or visible light. Irradiation speeds the curing in areas where blooming might occur, or in wide gaps where curing is slow. Because this product has these properties, and performs as well as the conventional instant adhesives, it is widely used. |
| · |
Offers a proprietary light-curing function in a conventional instant adhesive. |
| · |
Instantly cures and bonds on the penetrated surfaces of adherends, so that temporary fixing tools are not required. |
| · |
Any overflow is cured by irradiation with light. |
| · |
Irradiation with light prevents blooming. |
| · |
Filling adhesion, which is difficult with the conventional instant adhesives, is made possible by irradiation with light. |
| · |
Because of the anion polymerization of this product, curing with light is not inhibited by oxygen. Thus the product offers excellent surface curing. |
|
(Does not bond soft vinyl chloride, silicone, polyolefine, fluorocarbon resin, and penetrative materials.) |
| · |
Can be used instead of an adhesive that requires an accelerator. |
| · |
Has strong adhesive strength for a wide range of materials. |
|
| · |
Bonding of electronic, optical, and general parts where blooming is undesirable |
| · |
Fixing and bonding of optical lens base |
| · |
Fixing and bonding of various light-blocking nonmetallic materials |
| · |
Fixing and bonding of decorative materials |
| · |
Bonding of joints in printer heads and bearings |
| · |
Fixing of FDD parts, such as carriages and magnetic shields |
| · |
Bonding of drum motors and main shafts |
| · |
Bonding of glass frames and nameplates |
| Item |
Units |
1771E |
1773E |
Test method |
| Color and appearance |
- |
Clear yellow |
Clear yellow |
3TS-201-01 |
| Viscosity |
mPa s(cP) |
2(2) |
150(150) |
3TS-210-01 |
| Set time |
NBR-NBR |
Sec |
2 |
2 |
3TS-220-01 |
| Iron-Iron |
3 |
5 |
3TS-220-04 |
| Shearing adhesive strength |
Iron-Iron |
MPa(kgf/cm2) |
15(153) |
16(163) |
3TS-301-11 |
| Standard curing conditionE/td>
| kJ/m2(J/cm2) |
10(1) |
10(1) |
4kW high-pressure mercury lamp |
|
|
|
|
