|
Product category
1000 series
2000 series
3000 series
4000 series
5000 series
6000 series
7000 series
9000 series
Others
|
 |
|
Adhesive/Potting-Agent Coating Equipment |
| Equipment for coating with adhesive or potting agent mainly of TB2000 and TB3000 series. The construction includes a pressure tank, a material discharger, and nozzles. |
 |
 |
 High-Precision Two-Fluid-Blending Microdrop Dispenser
|
|
|
Fixed-volume mixing dispenser for 2-compound liquid materials such as the TB2000 Series.
Enables highly precise mixture discharge. |
|
 |
|
Mini Coater C4 |
|
|
A handy pneumatic dispenser of syringe type. |
|
 |
|
 Specifications |
· Power Source: 100–240 V ac (±10%)
· Dimensions (W x D x H mm): 190 x 136 x 73 (Controller) |
|
Coater SIII Controller |
|
|
A handy controller for controlling the pressure tank and the material discharger. |
|
 |
|
| Specifications |
· Power Source: 100–240 V ac (±10%)
· Dimensions (W x D x H mm): 85 x 151 x 215 |
|
|
Material Pressure Feeder |
| |
| |
A device to feed the material loaded in the pressure tank by means of compressed air.
|
Model Type:
PT-005 (half liter tank)
Specifications:
Special pressurized tank
| Container: |
| Bottle manufactured by ThreeBond |
| · 50g container |
| · 250g container |
| · 500cc container |
|
Note: Also usable for canned materials. |
 |
Model Type:
PT-01 (one liter tank)
Specifications:
Special pressurized tank
| Container: |
| Bottle manufactured by ThreeBond |
| · 50g container |
| · 250g container |
| · 500cc container |
| · 1000cc container |
|
Note: Also usable for canned materials. |
 |
|
Material Discharger |
| |
| |
A valve to enable/disable discharge of the material fed from the pressure tank.
|
| Model Type:SVR-3 |
| |
An air-pressure-control valve of needle type.
Featured with higher durability than SVR. |
|
 |
| Model Type:Slender-SVR |
| |
| An air-pressure-control valve of needle type. Featured with higher durability than SVR and a slender needle suitable for a small amount of coating. |
|
 |
Syringe |
|
|
Accommodates resin. Used in combination with a handy dispenser such as Mini Coater C4. |
|
 |
|
Sizes (ml): 1–100
Model types for general resin, UV-curing resin, and light-curing resin are available. |
|
|
Nozzles and Support Units |
| |
| |
Easily replaceable nozzles.
Diverse line-up of high-quality materials, nozzles in various lengths, etc.
| Sizes(G): |
| 30–12 |
Internal Diameter (mm):
0.14–2.27 |
External Diameter (mm):
0.22–2.77 |
|
|
 |
A specially designed nozzle block to stabilize a nozzle.
Dimensions
(W x D x H mm):
14 x 37 x 14 |
|
|
 |
Note: Other types of coating equipment are available. Don't hesitate to contact our distributor nearest to you. |
|
