Product List

Membership registration or login is required to view SDS / technical materials.

  • PICK UP

    ThreeBond 1901

    Molybdenum disulfide anti-seizure lubricant

    • Molybdenum disulfide-based anti-seizure lubricant which can form a tough lubricating film excelling in heat resistance and pressure resistance.
    • Applicable in a wide temperature range (-60 to 400ºC) Applicable at up to 800ºC when used for prevention of seizure of sealed parts of screws, pins, etc.
    • Facilitating assembly and disassembly (particularly of joints and threaded portions) and reducing working hours.
    • Preventing heat generation, wear, seizure and scoring of sliding parts.
    • Reducing machine vibration and frictional noise.

  • PICK UP

    ThreeBond 1910G

    Molybdenum Disulfide Brake Anti-squeal Spray, Spray Grease Type

    • Effective in preventing brake squeal on small cars.
    • Lubricity derived from molybdenum disulfide prevents wear of sliding parts.
    • Excelling in extreme pressure resistance, heat resistance and water resistance.
    • Rust prevention performance to protect metallic parts from rust.

  • PICK UP

    ThreeBond 2045B / ThreeBond 2145B

    Two-component Room-temperature-curing Heat Dissipation Epoxy Resin

    • Two-component room-temperature-curing epoxy compound resin
    • Excellent heat dissipation property
    • High bonding strength
    • Meeting UL94 V-0 flammability rating

  • PICK UP

    ThreeBond 2049 / ThreeBond 2149

    Two-component Room-temperature-curing Epoxy Resin

    • Two-component room-temperature-curing epoxy compound resin.
    • Good curability at room temperature.
    • Flexibility and high adhesion.

  • PICK UP

    ThreeBond 2209

    One-component Heat-curable Epoxy-compound Resin (Biomass Mark Certified Product)

    • Biomass raw materials are used as part of the raw materials.

  • PICK UP

    ThreeBond 2296B

    Low Temperature Rapid Curing One-component Epoxy Resin

    • Rapid curing at low temperature
    • Good shape retention
    • High strength
    • Low halogen content

  • PICK UP

    ThreeBond 2358C

    Sealock Processing / Heat-Resistant Type

    • This is a sealing process primarily composed of fluororesin.
    • Since it's a baked-on type, it provides a seal simply by screwing it in.
    • Excellent heat resistance, maintaining sealing performance up to 170°C (approx.).
    • Excellent chemical resistance.

  • PICK UP

    ThreeBond 2365C

    Threelock processing(water-based type)

    • Excellent repeatability. Complied with JIS B 1056(Prevailing torque type steel hexagon nuts)
    • Available for a wide range of screw diameter:M1.6 to M40.
    • Biomass raw materials are used as part of the raw materials.

  • PICK UP

    ThreeBond 2418

    Pre-coated bolts MEC process (Water-based, acrylic heat resistance type)

    • Medium level of fixing strength.
    • Excellent heat resistance. (Locking: 150°C, sealing: 170°C)
    • Applicable to minimum screw diameter of M3.
    • Standard curing condition: 25°C for 24 hours.

  • PICK UP

    ThreeBond 2448

    MEC processing for pre-coating bolts (water-based, high strength epoxy type)

    • Highest level of fixing strength
    • Excellent heat resistance (locking: 150℃, sealing: 170℃)
    • Applicable to minimum screw diameter of M2
    • Standard drying conditions: 25℃ for 24 hours