Product List

Membership registration or login is required to view SDS / technical materials.

  • ThreeBond 2583G

    Electrical contact rust-preventing, lubricating and protecting agent

    • Excellent rust preventing effect.
    • Excellent resistance to metallic corrosion.

  • ThreeBond 2702

    Industrial cleaner

    • It is a hydrocarbon solvent.
    • It dries quickly.
    • Not applicable to regular rules.

  • ThreeBond 2720C

    Industrial water-soluble lubricant

    • Rubber parts
    • Lubrican

  • ThreeBond 2771D

    Industrial floor cleaner, neutral type, not subject to PRTR Law

    • Environmentally-friendly neutral type.
    • Not subject to PRTR Law.
    • Meeting the uniform national effluent standards (BOD, COD and normal-hexane extract substances) specified by Water Pollution Control Law (0.5 w/v% water solution).
    • Excellent ability to penetrate and lather.
    • Excellent cleaning ability can be obtained regardless of water quality, hard water or soft water.

  • ThreeBond 2921D

    Non-chlorofluorocarbon Dust Blower

    • Because this product uses a mixed gas of DME and CO2 whose warming effect is small (GWP: 1 or less), it is much more environmentally-friendly than products that use HFC-134a (GWP: 1430) and HFC-152a (GWP: 124) whose warming effect is large.
    • The container of the product has a special absorber inside, which prevents a liquid gas from being sprayed when the product is used upside down.
    • The product's prevention of a liquid gas from being sprayed enables the concentration of the gas around the product to be low. Therefore, even if a spark or static electricity occurs, a fire accident can be prevented.
    • This prevention also prevents discoloration or deformation of materials used for liquid crystal displays, keyboards, etc. caused by a sprayed liquid gas. This product also prevents breakage of lenses, etc. and a frostbite injury on skin, both of which are
    • This product meets the requirements of "Act on Promoting Green Purchasing". When the spray button is just pressed, dust, waste thread, dirt, etc. can be blown off easily. Small wastes in narrow spaces can also be removed easily.

  • ThreeBond 3006F

    UV-curing Resin

    • The resin can cure under irradiation with UV light (200 to 400 nm) only for several to several tens of seconds.
    • Excellent heat resistance and chemical resistance.
    • The resin forms a rubber-like elastic cured body excelling in conformability to the substrate.
    • Biomass raw materials are used as part of the raw materials.

  • ThreeBond 3013Q

    UV Curable Acrylic Elastic Adhesive

    • Cures in seconds by exposure to UV light (200 to 400 nm wavelength)
    • After curing, retains rubber elasticity over a wide temperature range
    • Excellent heat resistance
    • Excellent oil resistance

  • ThreeBond 3013Z

    UV-curing Resin

    • The resin can cure under irradiation of UV light for several to several tens of seconds.
    • Portions of the resin not exposed to UV light can be cured by heating.
    • After curing, the resin becomes an elastic body excelling in heat resistance and chemical resistance.
    • It emits fluorescence when irradiated with black light (365 nm), and it is possible to check whether or not it has been applied.
    • Biomass raw materials are used as part of the raw materials.

  • ThreeBond 3015F

    UV-curing resin for precision bonding

    • High Tg (glass transition temperature)
    • High tensile shear strength
    • Low linear expansion coefficient and low cure shrinkage

  • ThreeBond 3017

    High peel strength light curing adhesive

    • Excellent peel strength to films including polyester films
    • Excellent peel strength between various plastics and to plastics and metals
    • After curing, the resin has flexibility at room temperature.
    • Low moisture permeability
    • Biomass raw materials are used as part of the raw materials.