Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3003J
- Curing in seconds to several tens of seconds under irradiation with UV light
- Low viscosity and excellent workability
- Excellent adhesion on glass, metals, etc.
-
ThreeBond 3003J
- Curing in seconds to several tens of seconds under irradiation with UV light
- Low viscosity and excellent workability
- Excellent adhesion on glass, metals, etc.
-
ThreeBond 3006D
- The resin cures under irradiation with UV light for several to several tens of seconds.
- Portions of the resin not exposed to UV light can be cured by heating.
- Excellent light resistance
- The resin forms a rubber-like elastic cured body excelling in conformability to the substrate.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3006F
- The resin can cure under irradiation with UV light (200 to 400 nm) only for several to several tens of seconds.
- Excellent heat resistance and chemical resistance.
- The resin forms a rubber-like elastic cured body excelling in conformability to the substrate.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3013B
- Cures in seconds to several tens of seconds under irradiation with UV light
- Colored to visually indicate the state of application
- Excellent adhesion to various substrates
- After curing, it becomes a flexible cured material.
-
ThreeBond 3013Q
- Cures in seconds by exposure to UV light (200 to 400 nm wavelength)
- After curing, retains rubber elasticity over a wide temperature range
- Excellent heat resistance
- Excellent oil resistance
-
ThreeBond 3013Z
- The resin can cure under irradiation of UV light for several to several tens of seconds.
- Portions of the resin not exposed to UV light can be cured by heating.
- After curing, the resin becomes an elastic body excelling in heat resistance and chemical resistance.
- It emits fluorescence when irradiated with black light (365 nm), and it is possible to check whether or not it has been applied.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3015F
- High Tg (glass transition temperature)
- High tensile shear strength
- Low linear expansion coefficient and low cure shrinkage
-
ThreeBond 3017
- Excellent peel strength to films including polyester films
- Excellent peel strength between various plastics and to plastics and metals
- After curing, the resin has flexibility at room temperature.
- Low moisture permeability
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3017B
- The resin cures under irradiation of ultraviolet light (wavelength of 200 to 400 nm) in several seconds to several tens of seconds.
- The hardness of the cured resin shows flexibility at normal temperatures.
- It has high peel strength between plastic materials and between plastic and metallic materials
- It has low moisture permeability and water absorption.
- Biomass raw materials are used as part of the raw materials.