Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3056K
- Cures and shows adhesion in seconds to several tens of seconds under irradiation with UV light. After this, completely cures with moisture.
- Can be solidified by moisture in narrow spaces not exposed to UV light.
- Flexible cured material.
- Adheres to glass, metals and plastics.
-
ThreeBond 3057
- Cures in seconds to several tens of seconds under irradiation with UV light
- Portions of the resin not exposed to UV light can be cured by heating.
-
ThreeBond 3057J
- Cures in seconds to several tens of seconds under irradiation with UV light
- Portions of the adhesive not reached by UV light can be cured by heating.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3059D
- Hardening is attained by UV irradiation of ten seconds - some dozens of seconds.
- The amount of outgas generated by hardened substances (decrease in weight) is small.
- With thixotropy, a shape can be kept as it is after application, and leakage/drip can be avoided.
- It has excellent adhesive power on various materials such as glasses, metals and others.
-
ThreeBond 3060
- Cures and displays bonding strength in several seconds to several tens of seconds by exposure to UV light (200 to 400 nm wavelength).
- In addition, it has anaerobic curability and can be used for bonding joints which cannot be exposed to UV light.
-
ThreeBond 3062U
- Cures quickly by exposure to UV irradiation. (Standard curing conditions: 30 kJ/m2 (3000 mJ/cm2 ))
- Has flexibility and is suitable for bonding of different materials.
- Has anaerobic curability and is applicable to bonding of metal parts.
-
ThreeBond 3064E
- Cures by UV irradiation in seconds
- In metallic joints which cannot be exposed to UV light, the resin can be anaerobically cured.
- Excellent bonding strength between different materials
-
ThreeBond 3065E
- Curing in seconds under irradiation with UV light (Standard curing condition: 30 kJ/m2 {3000 mJ/cm2 })
- Since it has flexibility, it is suitable for bonding different materials.
- Since it has anaerobic curing ability, it can bond metallic parts.
- Since it is a low outgassing material, it is applicable to electronic devices which are easily affected by the outgassing.
- It has well-balanced tensile shear bond strength and T-peel strength and is suitable for surface bonding. * Anaerobic cure: The resin penetrates into the thin gap between metals and cures in the gap isolated from the air.
-
ThreeBond 3074C
- Excellent transparency at the initial stage of curing.
- The initial transparency is kept almost completely after heating to up to 100ºC.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3075
- It forms a transparent, soft cured product with excellent surface hardening properties.
- Excellent scratch resistance.