Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3315E
- The one-part solvent volatilization type adhesive does not require weighing and mixing operations necessary for two-part adhesives and, therefore, excels in workability and mass productivity.
- Since it contains synthetic rubber as a main component, it forms a flexible electroconductive film.
- It is possible to bond parts by hot-melt method after the solvent volatilizes and a dry film is formed.
-
- Single component, heat-curing conductive adhesive
- Bonding at 80ºC in 60 min
- Solvent-free
- Syringe type
-
ThreeBond 3350C
- The paint has good adhesion to various materials and can form electroconductive coating films when dried at room temperature.
-
ThreeBond 3351C
- One-part and low-viscosity resin excelling in workability
- It can be cured in 60 min by heating at 90 C.
-
- An adhesive film can be formed by screen printing according to the shape of the part to be connected.
- Some contacts can be connected at a time.
- The adhesive can be applied to surfaces, such as transparent conductive glass, which cannot be soldered.
- Unlike conductive rubbers and rubbers reinforced with metallic wire, the adhesive does not require fixing under pressure after bonding.
- Compared to conventional adhesives, it has improved adhesion to film materials, and substrates can be selected from a wide range of materials.
-
- Strong adhesion to a wide range of materials
- After curing, it becomes a rubber-like strong elastic material. It has significantly higher strength and elongation than other elastic adhesives
- Light- or heat-curing equipment not required
- The pot life (gel time) after mixing of the two components is relatively long, thereby allowing sufficient time for application
- The curing time can be shortened by heating after bonding, so the curing speed can be controlled according to the situation
-
ThreeBond 4108
- Low-modulus cured material excelling in elasticity
- Paintable after curing
-
ThreeBond 5264B
- It can be easily applied with a brush.
- Since it dries quickly, it is easy to use.
- It can improve the adhesion.
-
ThreeBond 5268
- Can be easily applied with a brush.
- Since it dries quickly, it is easy to use.
- Can improve adhesion.
-
ThreeBond 6123E
- Easy to apply with the brush supplied with the container.
- One-component, quick-drying and easy-to-use .
- Improving car design.
- Excelling in heat resistance, water resistance and corrosion resistance and keeping good appearance for a long term.
